YZT-CJ-1010A Laser Range Finder Module

Technical Specification

1.General

YZT-CJ-1010A laser ranging module is the eye safety laser ranging module in the photoelectric system, which can detect the target distance and transmit the measured distance to the host computer through serial communication.

2.Structure composition and main function index

The YZT-CJ-1010A laser ranging module consists of a laser, a transmitting optical system, a receiving optical system and a control circuit. The main performance is as follows:

2.1 Operating range

Visibility under visible conditions is not less than 15km, diffuse reflectance ≥0.3, humidity ≤80%, the vehicle (2.3m×2.3m target) ranging distance ≥10km.

2.2 Features

The main functions of the laser ranging module are:

a) single ranging and continuous ranging;

b) Range strobe, front and rear target indication;

c) Self-inspection function.

2.3 Performance

Wavelength: 1535nm±5nm;

Laser divergence Angle: ≤0.3mrad;

Continuous ranging frequency: 1~10Hz adjustable;

Ranging accuracy: ≤±2m (RMS);

Accuracy: ≥98%;

Minimum measuring range: ≤50m;

Ranging resolution: ≤30m (multi-target);

Power supply voltage: DC9V ~ 16V (can be customized);

Weight: ≤140g;

Power: average power consumption ≤1.5W (1Hz operation), peak power consumption ≤5W;

Size: ≤83mm×68mm×46mm;

Working temperature: -40℃ ~ +60℃;

Storage temperature: -50℃ ~ +70℃;

2.4 Interface

Communication interface: RS422, 115200bps

Electrical interface: The interface model is Molex connector 51021-0800. The interface definition is described in the following table.

Installation dimension

3. Precautions for use

The laser emitted by the rangefinder is 1535nm for human eye safety laser, although it is a human eye safety wavelength, but it is recommended not to look directly at the laser;

When adjusting the parallelism of the optical axis, the receiving lens must be blocked, otherwise the detector will be permanently damaged due to excessive echo;

The measuring module is non-airtight, and must ensure that the relative humidity of the use environment is less than 80%, and ensure that the use of the environment is clean and sanitary, so as not to damage the laser;

The range measurement of the rangefinder is related to the atmospheric visibility and the nature of the target, and the range measurement will be reduced in the case of fog, rain and wind sand. Green leaf clusters, white walls, exposed limestone and other targets have better reflectivity, which can increase the measurement range. In addition, when the Angle of the target to the laser beam increases, the measurement range will be reduced.

It is strictly forbidden to emit laser to strong reflection targets such as glass and white walls within 50 meters, so as to avoid too strong echo, resulting in damage to the APD detector;

Do not plug and unplug the cable in the energized state;

Ensure that the power supply polarity connection is correct, otherwise it will cause permanent damage to the equipment;

ABOUT US

FOVA Technology (Shenzhen) Co.,Ltd. was founded in 2020,the factory is located in Shenzhen,China,the company's core R & D team and technology from China Aerospace Science and Technology Group , the team technical members engaged in related product development more than 4 years of work experience,Led the development of inertial turntable test system,strapdown inertial system,undertake various industries of non-standard test instruments and equipment pre- research,design and production tasks, for navigation, aerospace, aviation , electronics , weapons and other fields of scientific research institutes , colleges and industrial and mining enterprises to provide a large number of high-quality products and services.

FOVA Technology (Shenzhen) Co.,Ltd. has been committed to the design and manufacture of various professional technologies related to the inertial test turntable for many years . Especially in the structural design and manufacturing ,Angle measurement and positioning , speed control , simulation technology and manufacturing technology and other related research has accumulated rich experience and formed the necessary basic conditions in the design , manufacturing , testing process and a high-level professional team , is the most research and development and production of various types of turntable equipment complete capacity manufacturers. At present, it has the ability to develop and produce more than 130 sets (sets) per year. The company has more than 50 professional and technical personnel, mainly engaged in the research and development , design , commissioning and after-sales service of the turntable , the company specializes in supporting professional after-sales installation , commissioning , training services of engineering and technical personnel , so that rapid response , serious and responsible , service in place.

After years of precipitation and efforts in the inertial technology innovation and development , the company has inherited several generations of inertial test bench theoretical technology inheritance , and on the basis of the original technology to develop a new generation of inertial test bench development of the core key technology, has fully independent core technology of inertial platform test system , test simulation equipment and other high-tech series of products . The inertial platform system and inertial strapdown system developed and produced and the corresponding special test equipment have been successfully applied to a variety of strategic and tactical missiles , ship-borne , missile-borne and other key types of tasks .